VEGA 2789503 - 10.0 kHz INDUCTOSYN™ PRE-AMP WITH ACTIVE FILTER

Single Channel Pre-Amp with Active Filter.

ADVANCED FEATURES

  • Works with Linear and Rotary Inductosy™ Scales
  • Farrand, Heidenhain, Mitsubishi, and G&L Inductosyn™ Scales
  • Active Filter for Noise Immunity
  • Gain Range from 60:1 to 2400:1
  • Operates on Single +5 vDC Supply
  • Status LED’s for Signal High, Low, and Mid
  • Easy to Use
  • Compact Design
  • Panel Mount or DIN Rail Mounting Option
  • SPECIFI

2789503 SPECIFICATIONS

Input Frequency:

10 kHz

Input Voltage:

0.002 to 0.07 vPP

Max Output:

4.4 vPP

Power:

+4.8 to +5.4 vDC @ 50 mA

Mechanical:

2.875 x 2.875 x 1.000 in.
2.975 x 3.475 x 1.850 w/DIN

Weight:

46 grams (81 grams w/DIN)

Installation

  1. Install the 2789 board as described in the application drawing 2790501.
  2. Turn the gain pot fully CCW until the LO LED is illuminated.
  3. Turn the gain pot CW until the LO LED is extinguished and the MID LED is illuminated.
  4. Continue turning the gain pot CW to cent the pot between the MED LED and the HI LED.
  5. If adjustment from the gain pot does not allow the MED LED to become illuminated, Remove the x1 jumper to set the board in x4 gain. Repeat steps 2-4.

Part Number

Model Description
2789503 10 kHz Inductosyn™ Pre-Amp
2789DIN DIN Rail Mounting Option