VEGA 2792510 - Resolver to Encoder with Hall Effect Converter Boards

Get the Ruggedness of a Resolver and the Digital Simplicity of an Encoder. Resolver to Incremental Encoder Output with Index and Complements with Wiring Harness and DB-25F Connector.

APPLICATIONS

  • Ideal for Motor Commutation
  • CNC and Machine Tool Applications
  • PLC Positioning Control
  • Index/Rotary Tables
  • Tracking/Telescope/Telemetry Systems
  • Transfer Lines
  • Factory Automation
  • Robotic Applications
  • Nuclear Applications

SPECIFICATIONS

Excitation:

2 Phase @ 10.0 kHz

Resolver Input:

0.8 to 18.0 vPP

Power:

+4.8 to +5.4 vDC @ 250 mA

Drive Capacity:

200 mA Peak

Mechanical:

5.150 x 1.650 x 0.850 in.

Weight:

146 grams

Accuracy:

+/- 3 arc minutes typical

ADVANCED FEATURES

  • Non-Phase Locked Loop Design
  • Fast Response for Motor Commutation (Less than 50 uSec)
  • Automatic Gain Adjust for resolvers transformation ratio
  • Hall Signals for Indication of shaft position
  • Input for Motors with Thermal Switches
  • Highly Accurate
  • Tuned Filter For Noise Immunity
  • Single +5 vDC Supply Operation
  • Loss of Signal Detection
  • Fault Signal Outputs: Tri-State A-Quad-B, and SSR contacts
  • Status LED's for Power, Signal HI, and Fault,
  • Easy to Install and Easy to Set Up
  • Compact Connector Design

RESOLVER / ENCODER SPECIFICATIONS

  • Works with Harowe/Danaher, Tamagawa, Kerfott, Singer, AMCI, or most any synchro/resolver.Works with R11, R25 and Hollow Shaft Resolvers
  • Two Pole and Multi-Pole (Multi-Speed) Resolvers
  • Transformation ratios from 0.25 to 2.0
  • Fixed Excitation Frequency of 10 kHz
  • Incremental encoder A-Quad-B with Index and complements
  • TTL / Line Driver Outputs
  • Personality Module supports quadrature counts of 1024, 2048, 4096, and 8192 (Line Counts: 256, 512, 1024, and 2048)
  • Index pulse (Z Channel) occurs once per resolver cycle
  • Personality Module supports Hall cycles of 1, 2, 3, 4, 5, and 6 per resolver cycle

Simulated Hall Effect

The VEGA 2792510 Resolver to Digital Converter uses the resolver signals to produce three Hall type signals at TTL levels to duplicate the signals required by drives using Hall effect sensors to determine the shaft position for commutation purposes. This makes the 2792510 ideal for retrofitting drives that require indication of the shaft position in order to commutate the winding power of AC servomotors with resolvers.

High Speed Tracking

The tracking rate is a function of the excitation frequency and quadrature counts. With a 10 kHz excitation and 4096 quadrature counts the tracking rate would be 28,000 rpm. With a 10.0 kHz excitation and 8192 quadrature counts the tracking rate would be 14,000 rpm. Reducing the counts will increase the tracking rate proportionately.

Part Number

Model Description
2792510 Resolver to Encoder Converter w/Hall

The 2792510 comes with a personality module of 4096 quadrature counts and 2 Hall cycles. The 2792510 is intended for applications with the EB Series of motors.